Exp COPYLOT CLIENT for MT5

-----------------------------------------------------
-EAPADPRO v43 (Added new languages)
-Last Build Compilation

Fixed a bug with drawing objects for new versions of MT5 terminal

Enabled ReverseCopy support for PendingOrders

Client MT5
Исправлена ошибка MaxPosBySymbol

Перекомпиляция в последней версии терминала

Added an additional check for the number of positions in a series when using the NumberPosbeforeCopy parameter;

-EAPADPRO v41
-New Block Clients TPWCM EXTRA SETS Stops when Master Close Pos



When the block is turned ON (true): If the position is closed on the master, the position will not be closed on the client.


Instead, a trailing stop or breakeven is activated on the client at this position, instead of closing on the client,
you have the opportunity to turn on the trailing stop and follow the position further.

Trailing stop settings, in this case, are separate.

And it turns on only when this position is closed on the master.


Note: This feature automatically turns off the ClosePosbyMaster function when turned on.

-EAPADPRO v41
-New Block Clients TPWCM EXTRA SETS Stops when Master Close Pos
When the block is turned ON (true): If the position is closed on the master, the position will not be closed on the client.

Instead, a trailing stop or breakeven is activated on the client at this position, instead of closing on the client,
you have the opportunity to turn on the trailing stop and follow the position further.

Trailing stop settings, in this case, are separate.
And it turns on only when this position is closed on the master.


Note: This feature automatically turns off the ClosePosbyMaster function when turned on.

EAPADPRO v40 update, according to the new rules for using the MQL5 Market

EAPADPRO v39 Update
Updating information on the chart when redrawing data has been improved.
The table of deals is updated along with the panel update (The data update time is still configurable in the panel settings!)

MessageBox is replaced with Alert in case of an error in installing an EA for 2 charts in a row!
Attention! For the program to work, you need to install the Copylot Client EA on 1 chart!
It is forbidden to install Copylot Client on 2 charts or more!

Added MessageBox when starting the copier on 2 charts at the same time!

Optimization of the code;
Performance improvement;

- Master: Modification of the "MODIFY ONLY" function, Prohibition of checking the opening of a position if the "MODIFY ONLY" button is pressed on the master.

- Client: Added new parameter
- AdditionalLot: An additional lot that will be added to the main lot.
Allows you to increase or decrease the lot.
Note: You can set both +0.01 values ​​and -0.01 values.
Note: You can use this parameter together with KoefLot, RiskLot.
For instance:
Master lot = 1, AdditionalLot = 0.01, Client lot = 1.01;
Master lot = 1, AdditionalLot = -0.01, Client lot = 0.99;

- Client: When using OIP_Order_Instead_Position and ReverseCopy, the type of pending orders will also be reversed: Buy> SELLSTOP / SELLLIMIT, Sell> BUYSTOP / BUYLIMIT

- Client MT5: Added (transferred from Client MT4 version):
: RiskLotTypetype -> Type of dynamic lot calculation
: CorrectSLTPbyMaster -> Corrects SL / TP dist at different prices
========= Clients MaxPos =========
: MaxPosBySymbol -> Max number of pos per symbol to copy
: MaxOrderBySymbol -> Max number of orders per symbol to copy
: MaxSymboll -> Maximum number of symbols to copy
: NumberPosbeforeCopy -> Copy after a certain number of pos
========= Clients OIP EXTRA SETS Pos to STOP or LIMIT orders =========
: OIP_Order_Instead_Position -> Open Order Instead Positions
: OIP_TypeOrders -> Type of Orders
: OIP_DistanceOIP -> Distance from price

Added SessionTradeCheck parameter:
Checking trading sessions of the copied symbol before sending a request to the server!
The Expert Advisor checks whether it is possible to trade on this symbol at the current time and trading session.
If it is currently prohibited to trade on the symbol being copied, COPYLOT will not send a request to the server.
Attention! Some brokers may have multiple trading sessions!
If you find that the EA does not copy the Traded Symbol and writes the No Session Time error, you can disable this function!

Обновление функции торговых сессий..

Modified function of Trading sessions

Client MT5: Fixed OnlyLossPips error when entering a positive value.

- Copylot Client, Checking the possibility of opening positions in trading sessions of some brokers.

Тест обновление функции ReverseCopy

COPYLOT CLIENT MT5
Added additional check of tickets when closing a deal ticket / order ticket.

ProfitCopyOnly and LossCopyOnly can now work together.
Attention! 2 functions can work at the same time!
Those deals are copied that have fulfilled 1 of 2 conditions (Profitable / Unprofitable)

MT5 - Updated the algorithm for closing deals for Netting accounts.
Attention! INOUT and partial closing are not supported at the moment !!!
The copier can copy the opening / closing of deals only with a fixed lot (with what lot he opened - with such a lot it closes)

A Magicnumber has been added to the global variables of each ticket, for using several versions of the program with different Magicnumber.

Important update in Client MT5 version:
Fixed a bug when using several EAs working with one data file, when using different settings and magic numbers.

Recompile Last Build

2485 ReBuild

Correction of the error with lots 0.0001

New parametr DayToExpiration
DayToExpiration = 0 variable for selecting the expiration date of the pending order when trading on FORTS:
- 0: ORDER_TIME_GTC - No expiration date
- 1: ORDER_TIME_DAY - Expiration of the pending order until the end of the current day
- 2: ORDER_TIME_SPECIFIED_DAY - The number of days for the expiration of the pending order. The starting point from the current day.

If you get a Rejected error and when you hover over the order in the history you see this: (incomplete FOK information of the order), Or you have a BCS broker or Open broker, then you need to install:
TypeFilling = ImmediateOrCancel or TypeFilling = Return
DayToExpiration = 1

Client MT5
-Dynamic Lot Function Algorithm Updated Using RiskLot
-Added RiskRate parameter - the rate of your currency against the dollar.
By default, RiskRate = 0 - means that the adviser will try to find the right course (quotes) in the Market Watch.
In order for the autolot to work adequately with all currency pairs, you need to include "Show all currency pairs" in the Market Watch.

Version update for MetaTrader 5 and update for working with brokers with a possible lot of 0.005.
For example binary.com and Volatility 75.

Added CNH currency (Chinese Yuan) to Auto Suffix Detection (PreFixSymbol)

Copylot CLIENT
-- PreFixSymbol function updated for some Symbols.
-- Added function Delay_Seconds_General - Delay in seconds between all adviser requests to the server.
In other words: Each request to the server (opening, closing, modification) will be executed with a delay between each other.
For brokers who are forbidden too frequent requests to the server (a very rare event).
If Delay_Seconds_General = 0, then this function does not work.
Attention! For advanced users only.

Added block Clients extra Delays delay control when copying positions from the master account!
This unit sets the delay between the opening positions in seconds/points!
Parameters:
Delay_Seconds_ALL = 0; - Delay in seconds between the opening position, take into account all positions (Currency and the direction is not taken into account). 0 - disabled.
Delay_Seconds_Symbols = 0; - Delay in seconds between the open position of one currency is accounted for position 1 Currency (the direction is not taken into account). 0 - disabled.
Delay_Seconds_Type = 0; - Delay in seconds between the open position of one currency and every BUY / SELL positions, position 1 is taken into account currencies. 0 - disabled.
Delay_Points_Symbols= 0; - Delay in points between the open position of one currency is accounted for position 1 Currency (the direction is not taken into account). 0 - disabled.
Delay_Points_Type = 0; - Delay in points between the open position of one currency and every BUY / SELL positions, position 1 is taken into account currencies. 0 - disabled.
Warning: Delay in points can be equal to or greater than the opening price of the previous positions! The value in points - This is the minimum value of the distance from the nearest positions!
Warning: Delay in points is calculated on both sides of the opening price of the position!

for example:
Delay_Seconds_Type = 10; Delay opening of positions 1 and symbol in different directions 10 seconds!
Copylot Master EURUSD SELL 0.1 10:01:10 (opening time) Copylot Client EURUSD SELL 0.1 10:01:10 (opening time)
Copylot Master EURUSD SELL 0.1 10:01:11 (opening time) Copylot Client EURUSD SELL 0.1 10:01 20 (opening time)
Copylot Master EURUSD BUY 0.1 10:01:12 (opening time) Copylot Client EURUSD BUY 0.1 10:01:12 (opening time)
Copylot Master EURUSD BUY 0.1 10:01:14 (opening time) Copylot ClientEURUSD BUY 0.1 10:01:22 (opening time)
Copylot Master USDJPY SELL 0.1 10:01:15 (opening time) Copylot Client USDJPY SELL 0.1 10:01:15 (opening time)


for example:
Delay_Points_Type = 10; Delay opening of positions 1 and symbol in different directions 10 points!
Copylot Master EURUSD SELL 0.1 1.10800 (opening price) Copylot Client EURUSD SELL 0.1 1.10800 (opening price)
Copylot Master EURUSD SELL 0.1 1.10801 (opening price) Copylot Client EURUSD SELL 0.1 1.10810 (opening price)
Copylot Master EURUSD BUY 0.1 1.10810 (opening price) Copylot Client EURUSD BUY 0.1 1.10810 (opening price)
Copylot Master EURUSD BUY 0.1 1.10808 (opening price) Copylot Client EURUSD BUY 0.1 1.10820 (opening price)
Copylot Master USDJPY SELL 0.1 109.500 (opening price) Copylot Client USDJPY SELL 0.1 109.500 (opening price)

Fixed ChangingNamesSymbols error when copying with Symbol replacement and direct Symbol copying:
e.g. with ChangingNamesSymbols = "US30 = GER30;"
When you open positions on the US30 master, GER30 will be copied to the client;
When you open positions on the GER30 master, GER30 will be copied to the client;

Update for Netting Accounts

Обновление

The error of using the My TakeProfit and My Stoploss parameters on the USDJPY symbol has been fixed

When using TrailingStopUSE or BreakEven, the condition for modifying stop loss and take profit has been changed:

1. If Trailingstop or breakeven has not yet been activated (the position has no profit), then the stop loss and take profit from the master account are copied.!
2. If Trailingstop or Breakeven has already been activated and the stop loss of the position has been modified to a profitable zone, then copying the stop loss and take profit of this position is disabled and the COPYLOT continues the Trailing stop operation.

EAPADPRO v31

Parameters added to Copylot Client MT5:

PendingPrice_adjust = 0; // PendingPrice_adjust -> Adjusting distance for pending order
input string periods5 = "========= TrailingStop options
TrailingStopUSE = false; // TrailingStopUSE -> Enable the TrailingStop function
TrailingStop = 50; // TrailingStop -> Distance trailing stop
TrailingStep = 1; // TrailingStep -> Trailing stop modification step
input string periods8 = "========= BreakEven WithoutLOSS options
BreakEven = false; // BreakEven -> Enable the Breakeven function
LevelWLoss = 0; // LevelWLoss -> Distance from the OpenPrice to the profitable SL
LevelProfit = 0; // LevelProfit -> Number of points gained by the position to use BE

Fixed double opening error in Client MT5 when using multiple sources for copying.
Minor improvements.

- Added the function of forced modification of stop loss and take profit after opening positions.
If My_STOPLOSS and / or My_TAKEPROFIT is used.

Recompile

Copylot MetaTrader 5:
Beta testing: Added the ability to copy pending orders (PendingOrdersCopy ).
Note: Pending orders can be copied only from an account HEDGE.
Note: PendingOrdersCopy is disabled by default!
If you find an error, please let us know in the discussion section with the attachment of full log files and a description of your actions.
Thank you for understanding.

Fixed update graphics panel.

Ошибка версии (Master / Client)

- EAPADPRO v26

Important update for Copylot Client MT5:
Optimization of the history of the deals functions to speed up the work of the copyist to reduce the load on computer resources.

Client version mt5 updated!
Added execution of the algorithm on the tick, if the timer has not been initialized.

- Update EAPADPRO v25;
- Additional languages added to the panel: Spanish, Portuguese (Brazil), German, Chinese, Japanese;
The translation was made using the GOOGLE Translator + MQL + Terminal site!
if you find an error in your language, please report it in messages. Thank!
- Increase the speed of the panel;

This update is only for CLIENT MT5
- When copying from MT4 to MT5 and partially closing the position on MT4, the copied position on MT5 will be closed completely !!!
This eliminates the mistake of improperly copying a partially closed position!
Partial closure on the MT5 terminal and COPYLOT is not supported!
- Added the function of copying risk from master to client:
copying formula: lottoclient = (AccountBalance () / BalanceFromMaster) * lotfrommaster * LotExp;
- LotRiskFromMaster - use master account risk
- LotExp - Lot coefficient from the master.
You can set to increase or decrease the risk with the master account.
For example, LotExp = 2 and the wizard opens a lot of 0.1 with a balance of 10,000,
then on a client with a balance of 20,000, a lot of 0.4 is opened (with LotExp = 1, a lot of 0.2 is opened)

Изминения в работе программы

Bug fixed with Free Margin check

Global Update 2018 COPYLOT MT5
1. Fixed the modification of stop loss and take profit on open positions when MARKET is executed on a trading account.
2. Added support for copying to accounts with MARKET execution.
3. Auto-add symbols to the market overview, if this symbol is not selected in the market overview.
4. Forced reading of the history of deals after opening, if the deal was opened with a delay.
5. Added EAPADPRO v21 panel
6. Added hints in external variables.

Updated the version.
Modified the algorithm for automatically determining the orders filling type.

The copier has been modified for working on hedge accounts.

Added check for the use of the data file by another system

Fixed the error of handling the symbols with the suffix "..."

Update for UAC users:
If it's tunred on, all files are stored in the commen folder of the terminal

Added the auto-detection of the symbol suffix, if it differs from the standard name of the currency pair.
If the PreFixSymbol="Auto" is specified:
If the currency name on the client terminal has a suffix, i.e. EURUSD.m, then the trades will be copied with the suffix ".m"
Added the OnTimer event handler which increases the stability and copying speed.
Fixed changing of the EA settings on the fly. Now the EA settings can be changed on the chart, without the need to restart the EA.

- Fixed the error of modification of stop levels when using TP_adjust and SL_adjust.
- If it is impossible to open a deal according to the master account, DISABLED_TRADE will be displayed in the comment field - trade is prohibited for the symbol.
- Added automatic detection of the order filling type.

Fixed opening positions for the derivatives market, if the Deal is not complete.

Added forced detection of the new client tickets for the FORTS market. Closing deals on a master account leads to their forced closing on a client account as well.

исправлена ошибка проскальзования на некоторых брокерах