75 USD
Versione demo scaricata:
6 985
Pubblicato:
2 febbraio 2012
Versione attuale:
26.326
Non hai trovato un robot adatto?
Ordina il tuo
su Freelance
Vai alla sezione Freelance
Ordina il tuo
su Freelance
Come acquistare un Robot di Trading o un indicatore
Esegui il tuo EA
hosting virtuale
hosting virtuale
Prova un indicatore/robot di trading prima di acquistarlo
Vuoi guadagnare nel Market?
Come presentare un prodotto per venderlo con successo
Ti stai perdendo delle opportunità di trading:
- App di trading gratuite
- Oltre 8.000 segnali per il copy trading
- Notizie economiche per esplorare i mercati finanziari
Registrazione
Accedi
Accetti la politica del sito e le condizioni d’uso
Se non hai un account, registrati
ребят, подскажите почему при использовании меджик Баттон не устанавливаются уровни стопа и тейка? И приходится руками потом добавлять! Раньше такого не было!
Приветствую. скорее всего стоплосс и тейкпрофит не включен в панели. нужно см отреть скриншот. Эти функции не изменялись
Hi, I have a question on this utility! is there a way to open same trade on multiple pairs ? usually open same trade on different pairs and have to jump from one chart to another! just wonder how can i open one trade on aucad, audusa and audjpy at the same time!
Thanks
Wilson
Hi, I have a question on this utility! is there a way to open same trade on multiple pairs ? usually open same trade on different pairs and have to jump from one chart to another! just wonder how can i open one trade on aucad, audusa and audjpy at the same time!
Thanks
Wilson
Hello.
Can you please show a screenshot? What does its mean?
My panel doesn't consolidate positions. Your broker does that.
Perhaps you have a Netting account, where there is always one position?
Can you attach a screenshot?
Hello. @idrisslamou
Can you please show a screenshot? What does its mean?
My panel doesn't consolidate positions. Your broker does that.
Perhaps you have a Netting account, where there is always one position?
Can you attach a screenshot?
I want to remove the arrows from the chart, but I don't know which parameter to turn off. Could you show me a screenshot? I don't speak English.
很遗憾，我无法删除它们。终端会不断添加它们。
Can I decrease the number of lots when adding to my position using a grid trading strategy, especially if the price is rising?
试试这个：
很遗憾，我无法删除它们。终端会不断添加它们。
不是有吗，更新之后找不到这个参数了，不关掉图表很乱
中文（简体）— 详细说明（MT4/MT5）隐藏图表交易箭头
这些箭头/标记是终端在图表上显示的 交易历史(Trade History)（开仓/平仓点位）。关闭它就会消失：
方法 1（推荐）：图表属性
打开出现箭头的那个图表。
在图表空白处 右键点击。
选择 属性(Properties)（也可直接按 F8）。
在弹出的窗口中切换到 显示(Show) 选项卡。
找到并 取消勾选：✅ 显示交易历史(Show trade history)
这一步会隐藏图表上的 交易箭头/交易标记。
（可选）如果你还看到交易相关的水平线（例如开仓线/止损止盈线），再取消：✅ 显示交易水平(Show trade levels)
点击 确定(OK)。
如果箭头还在
确认你是在 同一个图表/同一个品种 上操作（每个图表设置可能不同）。
其他图表也需要的话，分别重复一次即可。
方法 2（快速开关）
菜单 查看(View) → 交易历史(Trade History)，将其关闭（如果你的终端有这个开关）。
English — Detailed instructions (MT4/MT5) to remove arrows from the chart
Those arrows/marks are trade history objects (entries/exits) drawn on the chart. To hide them:
Method 1 (recommended): Chart Properties
Open the chart where you see the arrows.
Right-click anywhere on the chart (empty area).
Click Properties (or simply press F8).
In the window that opens, go to the Show tab.
Find and untick: ✅ Show trade history
This removes the trade arrows/markers from the chart.
(Optional) If you also see horizontal lines for trades/SL/TP, untick: ✅ Show trade levels
Click OK.
If arrows are still visible
Make sure you did it on the same chart/symbol (each chart can have its own settings).
Repeat for other charts if needed.
Method 2 (quick toggle)
Go to View → Trade History and switch it off (if your terminal shows this toggle).
不是有吗，更新之后找不到这个参数了，不关掉图表很乱
这是在 MT4 终端中的情况——在 MT5 中略有不同。
但我添加了这个功能。
请更新您的程序版本并尝试新功能：
Create_Arrow_Open_Close (true/false) — 显示或隐藏图表上的交易入场/出场箭头。
true —开启：MetaTrader 将在图表上显示您的交易历史记录，包括开盘/平盘箭头（以及相关的历史标记）。
false —关闭：MetaTrader 将隐藏图表上的交易历史记录，因此不会显示开仓/平仓箭头。
技术说明：此选项切换终端图表设置 CHART_SHOW_TRADE_HISTORY （ true = 显示， false = 隐藏）。
这是在 MT4 终端中的情况——在 MT5 中略有不同。
但我添加了这个功能。
请更新您的程序版本并尝试新功能：
Create_Arrow_Open_Close (true/false) — 显示或隐藏图表上的交易入场/出场箭头。
true —开启：MetaTrader 将在图表上显示您的交易历史记录，包括开盘/平盘箭头（以及相关的历史标记）。
false —关闭：MetaTrader 将隐藏图表上的交易历史记录，因此不会显示开仓/平仓箭头。
技术说明：此选项切换终端图表设置 CHART_SHOW_TRADE_HISTORY （ true = 显示， false = 隐藏）。
Thank you so much for helping me solve this problem. This is a really great product.
感谢您的反馈。
Im trading XAUUSD, but VPS_CLP_Trailing_Profit_Pips_amount=100.0 doesn't show any sign of trailing opened order when trade is in profit.
please add CloseTerminalAfterClose independently ( when CLP is not enable)
also an option to ignore "last signal" in AutoTrade by Signal
Thank You
Im trading XAUUSD, but VPS_CLP_Trailing_Profit_Pips_amount=100.0 doesn't show any sign of trailing opened order when trade is in profit.
please add CloseTerminalAfterClose independently ( when CLP is not enable)
also an option to ignore "last signal" in AutoTrade by Signal
Thank You
Hello Chanon, thank you for the report.
1) XAUUSD trailing profit on VPS (why it may look inactive)
Please note a key limitation of the MQL5 VPS:
MetaQuotes blocks Trade Pad panel controls (buttons/checkboxes/edit fields) on VPS, so the CLP tab on the panel will not work on VPS. That is why we added the full CLP configuration into the utility External Parameters (Inputs).
How to make CLP trailing work on VPS
Enable VPS CLP mode:
VPS_CLP_Activation = true
Attention: when VPS_CLP_Activation=true , all CLP settings work only from External Parameters, and the CLP tab objects on the panel are inactive. This is expected.
Enable trailing profit mode (otherwise the amount value does nothing):
VPS_CLP_Trailing_Profit_Pips = true
VPS_CLP_Trailing_Profit_Pips_amount = 100.0 (for XAUUSD you may need a higher test value)
Make sure the symbol filter matches your goal:
XAUUSD only: VPS_CLP_CurrentSymbol = true
All symbols: VPS_CLP_AllSymbols = true
2) Points/Pips meaning (important)
All “Pips” values are actually points, calculated by your broker’s Point() / _Point .
XAUUSD often has 2 or 3 digits, so “100 points” can be a very different move depending on your broker. For testing on gold, please try larger values (for example 500–5000 points, depending on digits and volatility) so the trailing trigger becomes clearly visible.
3) If you are NOT using VPS
If you are not using MQL5 VPS, then your CLP control is done only from the Trade Pad panel → CLP tab (all controls work normally), and you do not need VPS_CLP external inputs.
4) About your requests
A) “CloseTerminalAfterClose” independent from CLP
This option is part of the CLP logic only. It is designed to close the terminal only after CLP finishes closing the basket.
So it cannot work independently when CLP is disabled.
B) “Ignore last signal” in AutoTrade by Signal
I’m not fully sure what you mean by “ignore last signal”, because different users mean different cases.
Please clarify one point:
Do you mean the utility remembers the previous signal direction/state and blocks a new entry, and you want it to open again even if the last signal is the same?
Or do you mean you want AutoTrade to act only on the current signal, without any “last signal” filter/history check?
If you describe a short example (2–3 lines: what signal you get, what it does now, what you want instead), we will confirm whether it’s a setting issue or a feature request.
Hello Chanon, thank you for the report.
1) XAUUSD trailing profit on VPS (why it may look inactive)
Please note a key limitation of the MQL5 VPS:
MetaQuotes blocks Trade Pad panel controls (buttons/checkboxes/edit fields) on VPS, so the CLP tab on the panel will not work on VPS. That is why we added the full CLP configuration into the utility External Parameters (Inputs).
How to make CLP trailing work on VPS
Enable VPS CLP mode:
VPS_CLP_Activation = true
Attention: when VPS_CLP_Activation=true , all CLP settings work only from External Parameters, and the CLP tab objects on the panel are inactive. This is expected.
Enable trailing profit mode (otherwise the amount value does nothing):
VPS_CLP_Trailing_Profit_Pips = true
VPS_CLP_Trailing_Profit_Pips_amount = 100.0 (for XAUUSD you may need a higher test value)
Make sure the symbol filter matches your goal:
XAUUSD only: VPS_CLP_CurrentSymbol = true
All symbols: VPS_CLP_AllSymbols = true
2) Points/Pips meaning (important)
All “Pips” values are actually points, calculated by your broker’s Point() / _Point .
XAUUSD often has 2 or 3 digits, so “100 points” can be a very different move depending on your broker. For testing on gold, please try larger values (for example 500–5000 points, depending on digits and volatility) so the trailing trigger becomes clearly visible.
3) If you are NOT using VPS
If you are not using MQL5 VPS, then your CLP control is done only from the Trade Pad panel → CLP tab (all controls work normally), and you do not need VPS_CLP external inputs.
4) About your requests
A) “CloseTerminalAfterClose” independent from CLP
This option is part of the CLP logic only. It is designed to close the terminal only after CLP finishes closing the basket.
So it cannot work independently when CLP is disabled.
B) “Ignore last signal” in AutoTrade by Signal
I’m not fully sure what you mean by “ignore last signal”, because different users mean different cases.
Please clarify one point:
Do you mean the utility remembers the previous signal direction/state and blocks a new entry, and you want it to open again even if the last signal is the same?
Or do you mean you want AutoTrade to act only on the current signal, without any “last signal” filter/history check?
If you describe a short example (2–3 lines: what signal you get, what it does now, what you want instead), we will confirm whether it’s a setting issue or a feature request.
Thank You for the detail's response. After spending more time with the EA, all of my request shouldn't have been asked. Trailing stop is unique; price must cross above to activate Trailing. as for ignoring previous signal, my request makes no sense if i enable both AutoTrade and AutoClose.
XAUUSD signal settings: 87/12, AutoTrade/AutoClose, M1 to W1 = true, BARS signals = true, maxSpread =10, 15:45-22:59 M-F Athens time
Thank You for the great EA
Thank You for the detail's response. After spending more time with the EA, all of my request shouldn't have been asked. Trailing stop is unique; price must cross above to activate Trailing. as for ignoring previous signal, my request makes no sense if i enable both AutoTrade and AutoClose.
XAUUSD signal settings: 87/12, AutoTrade/AutoClose, M1 to W1 = true, BARS signals = true, maxSpread =10, 15:45-22:59 M-F Athens time
Thank You for the great EA