EXCELENT !
Exp COPYLOT CLIENT for MT5
La copiadora comercial para MT5 es un comercio copiadora para la plataforma МetaТrader 5 .
Copia operaciones de forex entre cualquier cuenta MT5 → MT5, MT4 → MT5 para la versión COPYLOT MT5 (o MT4 → MT4 MT5 → MT4 para la versión COPYLOT MT4)
Copiadora confiable!
También puede copiar operaciones en el terminal МТ4 ( МТ4 → МТ4, МТ5 → МТ4 ): COPYLOT CLIENT para MT4
Esta versión Incluye entre terminales МТ5 → МТ5, МТ4 → МТ5 .
- La copiadora de ofertas se crea para copiar ofertas / posiciones entre 2/3/10 terminales.
- Se admite la copia desde una cuenta demo y desde cuentas de inversión.
- El programa puede ejecutarse en múltiples enlaces de terminal.
- Úselo como sincronizador de sus operaciones en varias cuentas de inversionistas que operan en una cuenta, COPYLOT copiará sus operaciones a otras terminales.
- Copiar de múltiples terminales a uno;
- Copia de una terminal a varias otras;
- Copie de cualquier corredor diferente a cualquier corredor diferente;
- Copiar de una cuenta cerrada abierta con una contraseña de Invest;
- Copiar de cuentas DEMO a una cuenta real y viceversa;
- Cobertura y cuentas de compensación.
Preparar
- COPYLOT CLIENT (Slave) Instale el Asesor Experto en el terminal donde desea copiar las operaciones.
- Instale el Asesor Experto en el terminal MetaTrader 5 donde desea copiar las operaciones.
- Abra el terminal en el que se copiarán las Posiciones y configure COPYLOT CLIENT en un gráfico
- Especifique cualquier nombre de etiqueta de texto como pathRead , por ejemplo, "COPY". Esto debe coincidir con el terminal maestro PathWrite (para unir los dos terminales).
- Para copiar operaciones, debe instalar la copiadora maestra gratuita en el terminal desde donde desea copiar las operaciones: COPYLOT Master para MT4 o COPYLOT Master para MT5 .
¡El EA debe establecerse en 1 Gráfico! ¡Por defecto, nuestro asesor copia todas las posiciones de su cuenta!
COPYLOT - Descripción completa y manual
Desarrollador Expforex
Parámetros
- Lot : el lote para abrir. Si es 0, abre ofertas con el lote maestro actual. De lo contrario, se especifica el lote que se utilizará para la copia comercial.
- RiskLot : una operación en la terminal del cliente se abrirá con un monto igual al% RiskLot de los fondos disponibles del cliente. La fórmula para calcular el lote está disponible en el artículo.
- KoefLot : si es 0, está deshabilitado. Si hay un coeficiente, las posiciones se abrirán con este coeficiente en la terminal del cliente.
- TakeProfitCopy / StopLossCopy : copia de take profit / stop loss de la cuenta maestra.
- ReverseCopy : revierte las operaciones (las ganancias y las pérdidas también se invierten).
- ProfitCopyOnly : copie posiciones rentables.
- LossCopyOnly : copia solo las posiciones perdedoras.
- NewTradeONLY : copie solo nuevas operaciones.
- ClosePosbyMaster : cierra las posiciones del cliente si las posiciones maestras están cerradas.
- TP_adjust / SL_adjust : adición (si el signo "-", la resta) de un número específico de puntos para TakeProfit / Stoploss.
- My_STOPLOSS / My_TAKEPROFIT : establecer su propio stop loss / tomar ganancias del precio de apertura actual.
- y otra.
INOUT no es compatible.
Los pedidos se copian tras la activación (Posiciones) y se copian a la cuenta del cliente. Puede activar esta función PendingOrdersCopy .
Atención: para duplicar posiciones en su cuenta, puede descargar nuestro duplicador de posiciones Exp4 Duplicator para MT4 o Exp5 Duplicator para MT5
Atención: COPYLOT no copia a través de Internet! ¡Copie entre terminales en una computadora!
Atención! COPYLOT no funciona en MetaQuotes VPS
#tags Copiar copiar oficios copiar comercio copiadora copiar comercios
Descripción | MetaTrader 4 | MetaTrader 5 |
---|---|---|
Panel de negociación en 1 clic desde el gráfico y el teclado | VIRTUALTRADEPAD MT4 | VIRTUALTRADEPAD MT5 |
Scalper Automático Profesional, Robot Inteligente | TICKSNIPER MT4 | TICKSNIPER MT5 |
Asesor experto universal en indicadores personalizados | El xCUSTOMEA MT4 | El xCUSTOMEA MT5 |
Asesor universal sobre indicadores estándar | EL X MT4 | EL X MT5 |
Vídeo


Really a great tool! The developer was able to create a very rich tool, that makes you able to trade, but also to learn from what happens between master and receiving accounts.
Now the I have it, I could not stay without it.

Great product, providing all the flexibility to copy deals across terminals.
Update: First I rented it for a month, now I bought it. Very good product and excellent support from the developer.




Really a great tool! The developer was able to create a very rich tool, that makes you able to trade, but also to learn from what happens between master and receiving accounts.
Now the I have it, I could not stay without it.


ICMarkets as Master (VPS) Alpari as Slave1 (VPS) AdmiralMarkets as Slave2 (VPS) All terminals are restarted (Master in first, Slaves in second) 5 BUY orders on Master : 1 BUY order missed on Slave1 : 2 BUY orders missed on Slave2 5 SELL orders on Master : 5 SELL orders missed on Slave1 : 5 SELL orders missed on Slave2 Does not work for the money


tested on live account . 20% of the orders didn't copy. also, failed to convert lot sizes on default settings.

⚠️⚠️⚠️ FULL INFO about your problem: How to make Files https://www.mql5.com/en/blogs/post/732566 ⚠️⚠️⚠️




Added additional check of tickets when closing a deal ticket / order ticket.
Attention! 2 functions can work at the same time!
Those deals are copied that have fulfilled 1 of 2 conditions (Profitable / Unprofitable)
Attention! INOUT and partial closing are not supported at the moment !!!
The copier can copy the opening / closing of deals only with a fixed lot (with what lot he opened - with such a lot it closes)
Fixed a bug when using several EAs working with one data file, when using different settings and magic numbers.
DayToExpiration = 0 variable for selecting the expiration date of the pending order when trading on FORTS:
- 0: ORDER_TIME_GTC - No expiration date
- 1: ORDER_TIME_DAY - Expiration of the pending order until the end of the current day
- 2: ORDER_TIME_SPECIFIED_DAY - The number of days for the expiration of the pending order. The starting point from the current day.
If you get a Rejected error and when you hover over the order in the history you see this: (incomplete FOK information of the order), Or you have a BCS broker or Open broker, then you need to install:
TypeFilling = ImmediateOrCancel or TypeFilling = Return
DayToExpiration = 1
-Dynamic Lot Function Algorithm Updated Using RiskLot
-Added RiskRate parameter - the rate of your currency against the dollar.
By default, RiskRate = 0 - means that the adviser will try to find the right course (quotes) in the Market Watch.
In order for the autolot to work adequately with all currency pairs, you need to include "Show all currency pairs" in the Market Watch.
For example binary.com and Volatility 75.
-- PreFixSymbol function updated for some Symbols.
-- Added function Delay_Seconds_General - Delay in seconds between all adviser requests to the server.
In other words: Each request to the server (opening, closing, modification) will be executed with a delay between each other.
For brokers who are forbidden too frequent requests to the server (a very rare event).
If Delay_Seconds_General = 0, then this function does not work.
Attention! For advanced users only.
This unit sets the delay between the opening positions in seconds/points!
Parameters:
Delay_Seconds_ALL = 0; - Delay in seconds between the opening position, take into account all positions (Currency and the direction is not taken into account). 0 - disabled.
Delay_Seconds_Symbols = 0; - Delay in seconds between the open position of one currency is accounted for position 1 Currency (the direction is not taken into account). 0 - disabled.
Delay_Seconds_Type = 0; - Delay in seconds between the open position of one currency and every BUY / SELL positions, position 1 is taken into account currencies. 0 - disabled.
Delay_Points_Symbols= 0; - Delay in points between the open position of one currency is accounted for position 1 Currency (the direction is not taken into account). 0 - disabled.
Delay_Points_Type = 0; - Delay in points between the open position of one currency and every BUY / SELL positions, position 1 is taken into account currencies. 0 - disabled.
Warning: Delay in points can be equal to or greater than the opening price of the previous positions! The value in points - This is the minimum value of the distance from the nearest positions!
Warning: Delay in points is calculated on both sides of the opening price of the position!
for example:
Delay_Seconds_Type = 10; Delay opening of positions 1 and symbol in different directions 10 seconds!
Copylot Master EURUSD SELL 0.1 10:01:10 (opening time) Copylot Client EURUSD SELL 0.1 10:01:10 (opening time)
Copylot Master EURUSD SELL 0.1 10:01:11 (opening time) Copylot Client EURUSD SELL 0.1 10:01 20 (opening time)
Copylot Master EURUSD BUY 0.1 10:01:12 (opening time) Copylot Client EURUSD BUY 0.1 10:01:12 (opening time)
Copylot Master EURUSD BUY 0.1 10:01:14 (opening time) Copylot ClientEURUSD BUY 0.1 10:01:22 (opening time)
Copylot Master USDJPY SELL 0.1 10:01:15 (opening time) Copylot Client USDJPY SELL 0.1 10:01:15 (opening time)
for example:
Delay_Points_Type = 10; Delay opening of positions 1 and symbol in different directions 10 points!
Copylot Master EURUSD SELL 0.1 1.10800 (opening price) Copylot Client EURUSD SELL 0.1 1.10800 (opening price)
Copylot Master EURUSD SELL 0.1 1.10801 (opening price) Copylot Client EURUSD SELL 0.1 1.10810 (opening price)
Copylot Master EURUSD BUY 0.1 1.10810 (opening price) Copylot Client EURUSD BUY 0.1 1.10810 (opening price)
Copylot Master EURUSD BUY 0.1 1.10808 (opening price) Copylot Client EURUSD BUY 0.1 1.10820 (opening price)
Copylot Master USDJPY SELL 0.1 109.500 (opening price) Copylot Client USDJPY SELL 0.1 109.500 (opening price)
e.g. with ChangingNamesSymbols = "US30 = GER30;"
When you open positions on the US30 master, GER30 will be copied to the client;
When you open positions on the GER30 master, GER30 will be copied to the client;
1. If Trailingstop or breakeven has not yet been activated (the position has no profit), then the stop loss and take profit from the master account are copied.!
2. If Trailingstop or Breakeven has already been activated and the stop loss of the position has been modified to a profitable zone, then copying the stop loss and take profit of this position is disabled and the COPYLOT continues the Trailing stop operation.
Parameters added to Copylot Client MT5:
PendingPrice_adjust = 0; // PendingPrice_adjust -> Adjusting distance for pending order
input string periods5 = "========= TrailingStop options
TrailingStopUSE = false; // TrailingStopUSE -> Enable the TrailingStop function
TrailingStop = 50; // TrailingStop -> Distance trailing stop
TrailingStep = 1; // TrailingStep -> Trailing stop modification step
input string periods8 = "========= BreakEven WithoutLOSS options
BreakEven = false; // BreakEven -> Enable the Breakeven function
LevelWLoss = 0; // LevelWLoss -> Distance from the OpenPrice to the profitable SL
LevelProfit = 0; // LevelProfit -> Number of points gained by the position to use BE
Minor improvements.
If My_STOPLOSS and / or My_TAKEPROFIT is used.
Beta testing: Added the ability to copy pending orders (PendingOrdersCopy ).
Note: Pending orders can be copied only from an account HEDGE.
Note: PendingOrdersCopy is disabled by default!
If you find an error, please let us know in the discussion section with the attachment of full log files and a description of your actions.
Thank you for understanding.
Optimization of the history of the deals functions to speed up the work of the copyist to reduce the load on computer resources.
Added execution of the algorithm on the tick, if the timer has not been initialized.
- Additional languages added to the panel: Spanish, Portuguese (Brazil), German, Chinese, Japanese;
The translation was made using the GOOGLE Translator + MQL + Terminal site!
if you find an error in your language, please report it in messages. Thank!
- Increase the speed of the panel;
- When copying from MT4 to MT5 and partially closing the position on MT4, the copied position on MT5 will be closed completely !!!
This eliminates the mistake of improperly copying a partially closed position!
Partial closure on the MT5 terminal and COPYLOT is not supported!
- Added the function of copying risk from master to client:
copying formula: lottoclient = (AccountBalance () / BalanceFromMaster) * lotfrommaster * LotExp;
- LotRiskFromMaster - use master account risk
- LotExp - Lot coefficient from the master.
You can set to increase or decrease the risk with the master account.
For example, LotExp = 2 and the wizard opens a lot of 0.1 with a balance of 10,000,
then on a client with a balance of 20,000, a lot of 0.4 is opened (with LotExp = 1, a lot of 0.2 is opened)
1. Fixed the modification of stop loss and take profit on open positions when MARKET is executed on a trading account.
2. Added support for copying to accounts with MARKET execution.
3. Auto-add symbols to the market overview, if this symbol is not selected in the market overview.
4. Forced reading of the history of deals after opening, if the deal was opened with a delay.
5. Added EAPADPRO v21 panel
6. Added hints in external variables.
Modified the algorithm for automatically determining the orders filling type.
If it's tunred on, all files are stored in the commen folder of the terminal
If the PreFixSymbol="Auto" is specified:
If the currency name on the client terminal has a suffix, i.e. EURUSD.m, then the trades will be copied with the suffix ".m"
Added the OnTimer event handler which increases the stability and copying speed.
Fixed changing of the EA settings on the fly. Now the EA settings can be changed on the chart, without the need to restart the EA.
- If it is impossible to open a deal according to the master account, DISABLED_TRADE will be displayed in the comment field - trade is prohibited for the symbol.
- Added automatic detection of the order filling type.
Отличный продукт