• Overview
  • Reviews (4)
  • Comments (93)
  • What's new

Auto Trade Copier Demo

Auto Trade Copier is designed to copy trades between multiple MT4/MT5 accounts/terminals with 100% accuracy.

With this tool, you can act as either a provider (source) or a receiver (destination). All trading actions will be copied from the provider to the receiver with no delay.

Limitation: This demo version only allows to set volume with fixed minimal lotsize. To use this product with all lotsize options, please check the full version at: https://www.mql5.com/en/market/product/4676.


Followings are highlight features

  • Copy between MT4 and MT5 accounts.
  • Switch between Provider or Receiver role within one tool.
  • One provider can copy trades to multi-receiver's accounts.
  • One receiver can copy trades from multi-provider's accounts.
  • Each account can act as both Provider and Receiver, so accounts can copy to each other in 2 ways transmission. This is like a trade sharing network.
  • Copy SL/TP modifications, not only Entry and Exit, so it's more secure for receiver in the case the connection is lost or terminal is down.
  • Receiver's account can still trade manually or use other EAs without any conflict.
  • Auto recognize and synchronize currency symbol prefix and suffix between brokers.
  • Allows up to 5 special symbols setup (i.e.: GOLD --> XAUUSD, etc.,).
  • Multi lot size setting options.
  • Allows to filter copy either SL or TP or exit point.
  • Allow to filter which type of orders will be copied.
  • Allow to inverted copy.
  • Drawdown protection.
  • Restore previous settings and status after terminal turn-off or power shutdown.
  • Real-time control panel.
  • Easy usage and friendly interface.


  • Install the tool to any chart (but no more one chart) of Provider's MetaTrader 4 terminal and choose the role as "Provider", then Enable it.
  • Install the tool to any chart of Receiver's MetaTrader 4 terminal and choose the role as "Receiver", enter the Provider's account number, then click on Enable button.
  • To copy from multi-providers, just attach the copier to an any new chart for each provider.

Settings and Parameters

  • Special symbols setting (Menu): Config up to 5 special pair symbols synchronization. Currency symbols will be auto recognized, but some special symbol pairs are different between brokers may need to be setup manually, such as: GOLD --> XAUUSD, SILVER --> XAGUSD, etc.,..
  • Change fontsize (Menu): Change the font size of interface if it's too small or too large for your screen resolution.
  • Reset to default settings (Menu): Reset all the settings back to manufacture settings.
  • Choose your role: Choose your role for the current account. It can be either Provider (copy source) or Receiver (copy destination).
  • Provider's account number: Enter the account number of the provider that you want to copy trades from.
  • Hidden mode (for provider only): Provider can hide his Stoploss/Takeprofit info as well as order modification from receivers in order to keep his strategy secret. Only entry and exit will be copied and results are still the same, but this mode may be a bit risky for receivers if the connection is lost and the orders are not protected.
  • Max. slippage: Maximum accepted slippage to copy trades. Price might be different between brokers, so if the current price of the receiver's account exceed max. slippage distance compared to entry price of provider's account, the trade will not be copied. This is useful to prevent unwanted slippage of copied trades, specially during high volatility (news releases).
  • Open trade timeout: Maximum waiting time that trades can be still copied from provider to receiver. If this trade timeout is exceeded from provider's trade open time, trade will not be copied, this only works with Instant/Market orders. This is useful to prevent copying outdated trades if receiver's account/terminal is shutdown for a while. For example: Trade timeout is 60 seconds means if receiver's is disconnected while provider open a Buy/Sell order, then receiver's terminal connect again within 60s and order will be copied, but if it's later than 60s the order will be ignored.
  • Set lotsize by: Choose how the trade volume on receiver's account will be set. There are 4 options:
    • Scaled with provider's balance: Receiver's lotsize will be scaled with Provider's base on their balance. Example: Provider trades 0.5 lot with 1000$ --> Receiver with 2000$ will trade 1.0 lot.
    • Multiply with provider's lotsize: Receiver's lotsize will be multiplied by a factor with Provider's lotsize.
    • Ratio with receiver's balance: Receiver's lotsize will be calculated based on a ratio factor of its own account balance. For example: Set 0.1 lot for each 1000$ balance, then it will trade 0.2 lot for 2000$ balance, 0.05 lot with 500$ balance.
    • Fixed lotsize: Every trades on receiver's account will be set with a fixed lotsize regardless of provider's lotsize or receiver's balance.
    • Custom risk percentage: Enter a specify risk percentage for each trade if stoploss occur. Example: A trade with 20pip stoploss is copied, receiver's lotsize will be set so that if stoploss occur receiver will lose 5% of balance. This regime is only applied for trades with predefined stoploss; with no-stoploss trades, "Provider's lotsize scale" regime will be applied.
  • Max. lotsize: Maximum allowed lotsize to open trade. This will prevent your account from open unanticipated over lotsize that may lead to unwanted drawdown.
  • Max Equity DD % (for receiver only): Select the scenario when a specified percentage of drawdown reached.
    • Close All Trades: Close all openning trades and delete all pending orders.
    • Stop Copy: Stop copying new trades, but still keep following the openning trades.
    • Close & Stop Copy: Close all openning trades and delete all pending orders. Also, stop copying new trades, but still keep following the openning trades.
    • Close Win Trades: Close all winning trades.
    • Close Lose Trades: Close all losing trades.
  • Copy Filter (for receiver only): Select which parameter of the orders will be copied.
    • Entry: Copy every trades from provider. If you disable this, it will only manage the copied trades, without copying new ones.
    • SL: Stoploss level of the orders will be copied.
    • TP: Takeprofit level of the orders will be copied.
    • Exit point: Receiver will close the orders folllow the provider. Otherwise, it will not follow exit and receiver have to exit on its own manually.
  • Order filter: Select which types of orders will be copied. Some filters are for both provider and receiver, but provider's choice is priority. There are multi-options:
    • Buy orders: Buy orders will be copied.
    • Sell orders: Sell orders will be copied.
    • Pending orders: Pending orders will be copied.
    • With comment: Orders with specified comment will be copied.
    • W/o comment: Orders without specified comment will be copied.
    • With magic #: Orders with specified magic number will be copied.
    • W/o magic #: Orders without specified magic number will be copied.
    • Custom pair: Only trade of custom pair will be copied (combine with order types above).
    • Inverted copy: All filtered trades will be inverted when come to/from receiver/provider: Buy<-->Sell, BuyLimit<-->SellStop, BuyStop<-->SellLimit, Stoploss<-->Takeprofit.
  • Copied Order Comment: Setting how the comment will be shown in copied orders at receiver's side
    • Default: Copied orders will have comment in format “Copied from #[provider account number]”.
    • None: Copied orders will have no comment.
    • Same: Copied orders will have the same comment as provider's orders.
    • Custom: Set a specific comment for copied orders.
Ali irwan
2017.07.26 13:16 

User didn't leave any comment to the rating

2017.02.21 14:15 

Awesome !!!

Rodrigo da Silva Boa
2015.11.20 03:20 

Estação copiadora excelente, parabéns o autor!!

2014.08.12 13:26 

User didn't leave any comment to the rating

Version 5.0 - 2018.03.06
- Improved: Copy between MT5.
- Improved: Code optimized.
Version 4.45 - 2017.11.30
- Fixed: corrected custom pairs filter.
Version 4.44 - 2017.07.05
- Improved: Recognize Forex pairs if even some brokers define them as CFD mistakenly.
Version 4.43 - 2017.04.19
- Fixed: Correct symbols matching when a broker has more than one symbols of the same pair.
Version 4.42 - 2017.04.18
- Improved: Allow different settings for different providers on each chart.
Version 4.41 - 2017.03.24
- Added: "Do Nothing" option to Equity Drawdown.
Version 4.39 - 2017.03.10
- Added: "Entry" to copy filter. So, receiver can choose to not copy new trades from provider while still follow the current copied trades.
- Added: Equity drawdown protection. So, receiver account can be protected when a specific drawdown of equity reached.
Version 4.38 - 2017.02.28
- Improved: Faster update to copied trades when provider changes settings.
Version 4.37 - 2016.12.22
- Fixed: Save custom comment setting after reload.
Version 4.36 - 2016.12.13
- Improved: Allows multiple comments filter by putting comments into quote mark. E.g: "Comment 1","Comment 2", "Comment 3"...
- Improved: Allows multiple magic numbers filter by separated semicolon. E.g: 123;456;789;
- Added: Same comment option -> the receiver will have the same order comment as provider.
Version 4.35 - 2016.11.08
- Improved: Allows negative slippage value (better copied entry).
- Improved: Allows excluded custom pairs by adding exclamation (!) before the pair symbol. E.g: !EURUSD, !USDJPY, ...
Version 4.34 - 2016.10.24
- Fixed: Copy SL/TP modification when provider remove SL/TP.
Version 4.33 - 2016.09.28
- Improved: Better handle with copy invalid entry pending orders.
Version 4.32 - 2016.08.22
- Fixed: Avoid non-stop loop of error #130 when EP/SL/TP is invalid.
Version 4.24 - 2016.07.18
- Improved: Auto recognize the difference of metal symbols between brokers (XAUUSD <-> GOLD, XAGUSD <-> SILVER).
Version 4.22 - 2016.06.27
- Improved: Real-time notice when AutoTrading on/off (for receiver).
- Removed: "Trade Timeout" is removed. Orders will be copied at anytime as long as it has the same or better price of source's order.
Version 4.21 - 2016.06.14
- Improved: Removed some unnecessary codes that make it run smoother.
Version 4.20 - 2016.05.31
- Added: User can edit the provider/receiver list by .csv file outside of MT4.
- Improved: Auto calculate lotsize scale if provider's account currency is different from receiver's account currency.
- Improved: Can concect to all other versions of my copier.
Version 4.19 - 2016.05.06
- Improved: Allows multiple magic numbers filter-in/out by separate symbol ";". E.g: 1234;5678;
Version 4.18 - 2016.02.25
- Added: Filter in/out for order comment and order magic number.
Version 4.17 - 2015.09.04
- Improved: Allow multiples custom pairs to copy.
Version 4.12 - 2015.05.12
- Improved: Only show trading symbol in Market Watch if necessary.
Version 4.11 - 2015.04.28
- Fixed: Conflict if maximum allowed order amounts between provider and receiver are different.
Version 4.1 - 2015.03.27
- Fixed: Unpredicted "array out of range" error.
Version 4.0 - 2015.03.05
- Fixed: No more conflicts between multi-providers with new comment options.

Caution: Close all existing copied orders before updating.
Version 3.99 - 2015.03.03
- Fixed: Removed untradeable symbols in Market Watch with some brokers (like Exness).
- Improved: A receiver is able to set different options for each providers group by loading the copier on different charts.
- Added: A provider is able to set comments for copied orders.

Caution: All existing copied orders need to be closed before updating this version.
Version 3.98 - 2015.02.24
- Fixed: Removed untradeable symbols in Market Watch with some brokers (like Exness).
Version 3.97 - 2015.02.18
- Fixed: Minor bug.
Version 3.96 - 2015.02.11
- Improved: Slightly faster data transfer.
- Added: Notification if Internet connection is lost.
Version 3.95 - 2015.02.04
- Fixed: Minor bugs.
Version 3.94 - 2015.02.03
- Fixed: Force to display all graphic objects to the front of the chart. They could be hidden at few low RAM computers with previous version.
Version 3.91 - 2015.01.21
- Reduced memory consumption.
Version 3.9 - 2015.01.16
- Fixed: Expert Advisor's status message correction.
- Fixed: Eliminate potential zero divides.
Version 3.8 - 2015.01.08
- Fixed: Allow provider role for investor account login.
Version 3.7 - 2015.01.06
- Added: Copy filter options for receiver.
Version 3.1 - 2014.12.24
- Added: Hiden mode for provider.
- Added: Balance ratio option for lotsize.
- Added: Support "Close By" function.
- Added: Support "Partial Close" function.
Version 3.0 - 2014.11.21
Improved: Faster copying speed.
Version 2.95 - 2014.11.18
- Improved: More stable for data transferring.
Note: Please make sure that there is no copied order processing before upgrade.
Version 2.80 - 2014.10.07
Fixed minor bugs about symbol recognition (reported from users).
Version 2.70 - 2014.10.01
Fixed minor bugs.
Version 2.6 - 2014.08.25
- Fixed: Minor bugs.
Version 2.4 - 2014.08.19
- Improved: Better recognition for long symbols
Version 2.3 - 2014.08.11
- Improved: Anti-requote, anti-offquote for receiver.
Version 2.2 - 2014.08.05
- Improved: Set virtual SL/TP within receiver's Stop/Limit level.
- Added: Max. lotsize option.
Version 2.1 - 2014.08.01
Improved display speed.
Version 2.0 - 2014.07.28
Now one receiver can copy from multi-providers.
Version 1.9 - 2014.07.17
Some improvements.
Version 1.8 - 2014.07.16
Improved: copies even if SL/TP within broker's stop/limit level.
Version 1.7 - 2014.07.10
- Improved: recognize speed.
- Changed: Allow to trade on all pairs but limited with fixed minimal lotsize.
Version 1.6 - 2014.07.01
Added option to set a multiplier for the provider's lot size.
Version 1.5 - 2014.06.26
- Improved symbols recognition.
- Fixed hang-up when account login changed.
- Compatible with more symbols.